HOW TO FIT LID INTO COOKER vessel

  • If gasket is not properly fitted into the lid curl. Make sure it is properly fitted as shown in picture alongside.

 

  • Place lid on cooker vessel so lid handle and vessel handle are together. (Note: do not force lid into cooker vessel.)

 

  • Turn lid handle so it is at a right angle to vessel handle.

 

  • See that arrow on rim of cooker vessel matches arrow on lid s rim.

 

  • Slide the lid slightly away from the vessel handle and tilt that portion of the lid that has the arrow on it into the mouth of the pressure cooker.

 

  • Insert lid under rim of cooker vessel.

 

  • Place the lid handle bar on top of the bracket groove. Adjust lid handle bar on the bracket lever until the gasket on the lid rests comfortably in direct contact with the underneath of the rim of the vessel of the pressure cooker.

 

  • Gently squeeze lid and vessel handles together. And fasten locking loop to catch on end of the main handle bracket.

 

  • If necessary, to ensure lid is properly seated press lid and adjust

 

HOW TO REMOVE LID FROM COOKER vessel

  • Gently squeeze lid and vessel handles together.

 

  • Unfasten locking loop from end of main handle bracket.

 

  • Tilt the lid down slightly into the mouth of the cooker and move the lid handle bar toward the right hand side.

 

 
  • As the lid handle bar approaches right angle position, gently tilt up the position of the lid away from the vessel handle and remove the lid out of the mouth of the pressure cooker.